Dual Tank Cold And Heat With Light Juice Machine With CE
Konmax Cold Drink Dispenser Specification:
| Material | Stainless steel R304 | Machine size | 380*420*740MM |
| power | 240/800W | Packing size | 400*470*750MM |
| Cold-beverage temperture | 7 to 12 degree | Hot-beverage temperature | 52 to 58 degree |
| Tank material | PC | Model | LSJ 25 L X1 |
| Condenser | with Copper tube | Certificate | CE |
| switch | LCD switch | Packing Way | Carton +foam inside |
| Electrics Standard | 110V-220V,50-60HZ | Drive Mode | Magnetic rotating |
| G.W | 22KG | N.W | 19KG |
| 40' HQ loading | 485PCS | FOB Shanghai | USD |
| 20' FT loading | 200PCS | Warranty | 1 Year |
Konmax Cold Drink Dispenser Detailed Photo:
Konmax Cold Drink Dispenser Packing Photo:
Konmax Cold Drink Dispenser Installing Methods and Notices
1.To install it , please choose tyhe site which is flat ,flexbile and can avoid the direct sunshine in summer .
2.Around the machine should have 150 mm up room to make the air circulating and make sure the machine can run effectively .
3.Before installing it please check the supply power whether it confirms to the requirements or not , The power supply cable is not too thin ot too long .The cross section of cable should be 1.5-2.5mm ,voltage is mouted on the fixed position with fuse which keep the users safety it must have the reliable grounding ,
The socket should be mouted on the fixed position with fuse which will keep the machine running safety .
4.To make the fix position for machine should make its fron lower and back higter (to adjust the foot of the
bottom can do it ),then the water in salver can flow into the box through the hose .
How to use the cold beverage machine?
1.To fall prepared beverage into the crock , the height of it is should not exceed the standard height (9L-12L-18L-20L-50L), otherwise the beverage will flow into the churn-dasher from the dasher tube,which will make the dasher burn .
2.The temperature of the beverage should not too high (not exceed 35), otherwise it will make bad effection for the refrigeration .
3.Plug in the supply power to the 3 hole socket , the grounding hold should connect with the protecable wire or fixture to ensure the safety .
4.To turn the switch on the position of refrigeration , press down the refrigeration switch , the compressor fan starts running and refrigeration system starts working .
Then start the dasher to mix or start the spewing swtich to spew.
5.When the beverage becomes to the suitable temperature , please make the cup against the push board lightly .the beverage will flow into the outlet mouth .
6.when the temperture reduces to the certain degree , the refrigeration will stop running because of the influence from the temperaturecotroller .And when it increases, it will start automatically again .
7.It should re-start after 5 minuters if it turn off suddenly or stop temporarily .otherwise it will damage the compressor .
Product Tags:
|
|
25L Commercial Cold Juice Dispenser Spraying Beverage Machine Magnetic Rotating Images
|
